4 • EN
BATTERY SIZE (Ah)
TIME TO 80% CHARGED
2Ah
2h
8Ah
8h
20Ah
4h
60Ah
12h
110Ah
26h
READY TO USE
The table shows the estimated time for empty battery to 80% charge
CHARGING PROGRAMS AND OPTIONS
Press the MODE-button to select between the charging programs and to add charging
options. The LEDs will indicate which programs and options that are selected. The
selected program will be memorised and restarted next time the charger is connected.
The table explains the different Charging Programs:
Program
Battery Size (Ah)
Explanation
1.2–14Ah
Small battery program, 0.8A
Use for smaller batteries.
14–160Ah
Normal battery program, 5A
Use for normal sized batteries.
Charging Options
Option
Explanation
Temp range
Cold weather option
Use for charging at low temperatures. Cold weather
option increases charging voltage
-30°C–0°C
(-22ºF–32ºF)
RECOND
Recond option
Use to return energy to empty batteries. Recond
your battery once per year and after deep
discharge to maximise lifetime and capacity. The
Recond option adds STEP 6 to the selected charging
program. Frequent use of the Recond program may
cause water loss in the batteries and reduce service
life of electronics. Contact your vehicle and battery
supplier for advice.
-30°C–+50°C
(-22ºF–122ºF)
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected to the battery´s
positive pole?
2. Is the charger connected to a 12V battery?
3. Has charging been interrupted in STEP 1, 2 or 5?
Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...
STEP 1:
...is seriously sulphated and may need to be replaced.
STEP 2:
...cannot accept charge and may need to be replaced.
STEP 5:
...cannot keep charge and may need to be replaced.
MODE
RECOND
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This happens if the charger
isn´t connected to the battery in 2 minutes.
