12
Aerial work platform
B-LIFT 18 HV
COD. UM0287_GB | REV. 00 | ED: 09/18
GB
Chapter 12
TROUBLESHOOTING
Error
Description
Solution
96
Maximum safety coeficient
exceeded
Retract the extension or raise the boom (other
movements will be blocked)
97
Inconsistency in the reading of
MCS5 and MCS6
Check boom rest sensors 5 and 6
98
Low battery voltage
Check the vehicle's battery
99
Inconsistency in the reading of
MCS5-MCS6, pulsing alarm
Check the boom rest sensors
101
Single angle and extension
sensor 1 no can
Check the Can-Bus line
102
Single angle and extension
sensor 2 no can
Check the Can-Bus line
103
Levelling and basket rotation
card 1 no can
Check the Can-Bus line
104
Levelling and basket rotation
card 2 no can
Check the Can-Bus line
105
“Rotation rev reading of the
slewing ring with motor rotation
stopped”
Check the slewing ring rotation system
106
“Rotation rev motor rotation
reading with the slewing ring
stopped”
Check the slewing ring rotation system
107
Basket levelling pre-alarm
Dangerous angle, manoeuvres which worsen the
situation are blocked
108
Basket levelling alarm
Basket levelling blocked
109
Difference in the reading of
outrigger lengths
?
111
Check W1 load cell
Saved data incorrect, recalibrate
112
W1 load cell, open circuit
Check the power and W1 output; check for readings
under the minimum (basket resting)
113
W1 load cell, V battery
Check the power and W1 outputs
114
Check L1 extension length
sensor
Saved data incorrect, recalibrate
