CTD PALLEON MOBILE, User Manual

Page: 19 / 24

19
1 -
Connect a water hose to the inlet of the
Palléon Mobile
2 -
Connect one or more hose to the premix outlet
3 -
Connect a suction pipe to the foam concentrate intake
4 -
Connect the
Palléon Mobile with the
power cable
on the
24 Vdc truck
- PALLEON powers on after switch on the battery switch.
The screen displays the current water flow and the last concen-
tration used.
- Select the concentration wanted by pressing the « + » and « - »
buttons. (Possible change during the intervention)
- Press «
START
»
- Dosing begins automatically when the water flow rate is higher
than 50 l/mn.
PALLEON keep the concentration depending the water flow wi-
thout any action from the users.
- Check the injection pressure (Manometer of the injector),
which must be greater than the discharge pressure of the water
pump.
- If the injection pressure is lower than the water pressure,
press and hold down the «
PRIMING
» button until the
liquid escapes from the prime tube.
Release the button to stop priming and check again the injection
pressure.
- At the end of the intervention press the button
When using foam concentrate it is necessary flushing the circuit.
Intervention procedure
1
3
2
4