3
Introduction
This document contains information on the operation, installation, and
maintenance of the SC310 Series Signal Conditioner . The signal conditioner
is a device that converts a sensor input to 0-20 mA, 4-20 mA, 0-5
V
dc
, or
0-10
V
dc
output signals and provides a buffered dynamic output of the vibration
waveform . The signal conditioner accepts input from an accelerometer, velocity
transducer, or proximity probe . The signal conditioner’s output can be configured
proportional to acceleration, velocity, or displacement depending on the input
transducer type . Additionally, the signal conditioner also contains dedicated
pins for input from a temperature sensor and a 4-20 mA signal proportional to
the temperature sensor input voltage .
SC310 Series Overview
The SC310 signal conditioner is a DIN rail mountable component used in
continuous machinery monitoring applications . It provides signal conditioning,
signal conversion, and re-transmission . All settings are configured using
downloadable and easy to use software (requires PC and a micro USB cable) . A
general list of features includes:
•
4-20 mA output signal for temperature
•
One selectable channel offering 0-5
V
dc
, 0-10
V
dc
, 4-20 mA, or 0-20 mA
output signals proportional to vibration
•
Built-in selectable 24
V
dc
, 4 mA IEPE Sensor Excitation
•
LED indicator for unit operation and basic troubleshooting
•
Selectable configurations for 0-Pk, Pk-Pk, RMS, as well as peak and hold
•
Input selectable between acceleration, velocity, and displacement
•
Ultrasound compatible up to 40 kHz
•
Independent and selectable digital bandpass filters
•
Output scalable for Metric and English
