95
CHAPTER 3
INTRODUCTION TO CLI
Show: #
show ipmc profile
3.9.22.2 (config)# ipmc profile <profile_name>
Syntax:
(config)# ipmc profile <profile_name>
Parameters:
<profile_name: word16>: Specify the desired profile name in 16 characters. When entered is pressed, the
command will change to (config-ipmc-profile)#.
Explanation:
Set up an IPMC profile.
Example:
Create an IPMC profile named “goldpass”.
Negation:
(config)# no ipmc profile <profile_name>
Show:
# show ipmc profile [ <profile_name> ] [ detail ]
3.9.22.3 (config)# ipmc range
Syntax:
(config)# ipmc range <entry_name> { <v_ipv4_mcast> [ <v_ipv4_mcast_1> ] | <v_ipv6_mcast>
[ <v_ipv6_mcast_1> ] }
Explanation:
Specify the multicast IP range. The available IP range is from 224.0.0.0
~
239.255.255.255.
Parameters:
<entry_name>: The name used in specifying the address range.
{ <v_ipv4_mcast> [ <v_ipv4_mcast_1> ] | <v_ipv6_mcast> [ <v_ipv6_mcast_1> ] }: Specify the multicast IP range.
The available IP range is from 224.0.0.0
~
239.255.255.255.
Negation:
(config)# no no ipmc range <entry_name>
Show:
# show ipmc profile [ <profile_name> ] [ detail ]
3.9.22.4 (config-ipmc-profile)# default range
Syntax:
(config-ipmc-profile)# default range <entry_name>
Parameters:
<entry_name: word16>: Specify an entry name in 16 characters for this IPMC profile.
Explanation:
To set default IPMC Profile Rule for a specific IPMC Profile.
# config t
(config)# ipmc profile goldpass
(config-ipmc-profile)#
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
