141
CHAPTER 3
INTRODUCTION TO CLI
receiver:
MVR receiver port.
Negation
: (config-if)# no mvr immediate leave
3.9.35 (config)# ntp
3.9.35.1 (config)# ntp
Syntax:
(config)# ntp
Explanation:
Enable NTP function.
Example:
Enable NTP function.
Negation:
(config)# no ntp
Show:
# show ntp status
3.9.35.2 (config)# ntp server
Syntax:
(config)# ntp server <index_var> ip-address { <ipv4_var> | <ipv6_var> | <name_var> }
Explanation:
Configure a list of NTP server’s address.
Parameters:
< index_var: 1-5>: Specify the index number of NTP server. The allowed range is from 1 to 5. The NTP servers are
tried in numeric order. If 'Server 1' is unavailable, the NTP client will try to contact 'Server 2'.
{ <ipv4_var> | <ipv6_var> | <name_var> }: Specify one of the three options.
<ipv4_var>:
IPv4 address.
<ipv6_var>:
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits
with a colon separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but
it can appear only once.
<name_var>:
The domain name for NTP server.
Example:
Set the NTP server 1 to 192.168.1.253.
Negation:
(config)# no ntp server <index_var>
Show:
# show ntp status
# config t
(config)# ntp server 1 ip-address 192.168.1.253
# config t
(config)# ntp
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
