140
CHAPTER 3
INTRODUCTION TO CLI
# show mvr [ vlan <v_vlan_list> | name <mvr_name> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
3.9.34.15 (config-if)# mvr immediate-leave
Syntax:
(config-if)# mvr immediate-leave
Explanation:
Enable immediate leave function. When enabled, the device immediately removes a port from a
multicast stream as soon as it receives leave message for that group. This option only applies to an interface
configured as MVR receivers.
Example:
Enable immediate leave function on port 1.
Negation
: (config-if)# no mvr immediate leave
3.9.34.16 (config-if)# mvr name
Syntax:
(config-if)# mvr name <mvr_name> type { source | receiver }
Explanation:
Configure port role of specific MVR profile for specific interface.
Parameters:
<mvr_name>: Specify a MVR name. The maximum length of the MVR name string is 16. Both alphabets and
numbers are allowed for use.
{ source | receiver }: Specify MVR port role.
source:
MVR source port.
receiver:
MVR receiver port.
Negation
: (config-if)# no mvr name <mvr_name> type
3.9.34.17 (config-if)# mvr vlan
Syntax:
(config-if)# mvr vlan <v_vlan_list> type { source | receiver }
Explanation:
Configure port role of a specific MVR VLAN ID for this specific interface.
Parameters:
<v_vlan_list>: MVR Multicast VLAN list
{ source | receiver }: Specify MVR port role.
source:
MVR source port.
# config t
(config)# interface GigabitEthernet 1/1
(config-if)# mvr immediate-leave
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
