14
M12 Cable Connector Installation
Before assembling M12 open cable, make sure you have the
following M12 cable connector components (Model: M12D-M4 M12 D-
Code Male) and open cable at hand.
Assembly Steps:
Step 1.
Insert the screw nut, O-ring, and housing into the cable in the
order shown in the figure below and keep them loose in this step.
Step 2.
Strip the cable and the individual cores to fit the connector.
Insert the stripped wires into the opened contact clamps.
Figure 3. Insert Components into the Cable
Figure 4. Insert the Stripped Wires to Contact Clamps
Screw Nut
Housing
Male Contact
Connector
O-Ring
