CTC Union ICR-4103 Series, User Manual

Page: 128 / 155

128
CHAPTER 3.
WEB CONFIGURATIONS
For SNMP version 3, you need to register authentication and allow a receiver that confirm the
packet was not modified in transit. There are three options to set up SNMP v3 configuration.
3.10.1.3 SNMP trap configuration
This section allows you to set up the SNMP trap configuration when you select the SNMP trap
function from Alarm output of system for your router. With SNMP trap setting, you can know the
status of remote device.
Service > SNMP > SNMP v3 User configuration
Item Description
Mode
Select from Disable or Enable to configure SNMP. The default is
Disable.
Name Fill in your name.
Auth Mode Select from Authentication or Privacy.
Authentication
Password
Fill in your authentication password.
Authentication Protocol Select from MD5 or SHA.
Privacy Password Fill in your privacy password.
Privacy Protocol Select from DES or AES.
Access Select from Read-Only or Read-Write.