CTC Union GSW-1005MS, User Manual

Page: 8 / 58

Chapter 1 Introduction
8
1.4 Product Specifications
Standards IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber-Optic
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol )
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based Network Access Control, Authentication
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
IEEE 802.3az EEE (Energy Efficient Ethernet)
Switch VLAN Groups up to 4096
Switching Fabric 12Gbps
Data Processing Store and Forward
Flow Control IEEE 802.3x for full duplex mode, back pressure for half duplex mode
MTU 9600 Bytes (Jumbo Frames)
MAC Table 8K
LAN 5 x RJ-45 10/100/1000BaseT(X) auto detect speed, auto negotiate duplex, auto
MDI/MDI-X function, Full/Half duplex
Fiber 1 X 100/1000 BaseX dual speed mode SFP slot, supporting DDMI
Connectors Network Cable UTP/STP Cat.5e cable or above
EIA/TIA-568 100-ohm (100m)
Ethernet Protocol CSMA/CD
Reverse polarity auto detect/correct
Protection Present
Overload current
protection Present
CPU Watch Dog Present
Power Supply External AC adapter, 12VDC 1A capacity
LED per unit Power (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow)
Power LED per RJ-45 port 10/100 Link/Active (Green), 1000 Link/Active (Amber)
LEDs LED per SFP port Link/Active (Green)