25
Management Packet High Priority
is a function which is enabled by default. Unless VLAN is enabled, this function is meaningless. The
packet priority is included as 3 bit priority in the VLAN tag. Management packets will be assigned the highest priority so that even in the
presence of high traffic throughput, this converter can still be easily managed.
Broadcast Storm
is a condition where either a loop exists on the network or an Ethernet transceiver is bad and exhibiting jabber. In
addition there are the deliberate attempts to bring a network down through virus and denial of service routines. When enabled, the
Broadcast
Storm Filter
will recognize and block the forwarding of these broadcasts.
Multicast storms
happen when application participants request retransmits of information they have missed in the multicast stream. There
are many applications, like video streaming, IP based punch clocks, IP based surveillance trackers and camera, that come with multicast or
some broadcast based protocol turned on by default. The
Multicast Storm Filter
can be enabled to filter these unwanted effects.
The
Unknown DA Unicast Storm Filter
can be used to filter the Unicast broadcasts whose objective is to cause deny-of-service. Some
Trojans and virus start scanning multicast IP ranges causing excess broadcasts and reducing network performance.
Summary of Contents for FTH4-1000MS
Page 28: ...28 3 5 6 VLAN 3 5 6 1 VLAN Group ...
Page 35: ...35 3 7 3 802 3ah Status ...
Page 46: ...This page is intentionally left blank ...
Page 47: ......