For the property owner
44
CTC EcoZenith
I
550
Upper Tank
Here the characteristics for the upper tank can be set. The settings are stop
temperature, times to switch the charging of upper and lower tank, additional
temperature, extra DHW, DHWcirc, etc.
Lower Tank
Here you can set the lowest temperature for the lower tank.
Solar Energy
Settings for the solar heating system, if this is defined.
Wood Boiler
Here you set the starting conditions for wood operation.
Ext Boiler
Here you set the start, stop and difference temperatures for an external boiler
(oil, gas, elec., etc).
Ext storage tank
If an external tank has been defined, its settings are made here. You can set start
and stop conditions for charging and a week program.
Pool
Stop temperature and difference for the pool operation can be set here, if applicable.
Remote control
Choice of remote control type.
“NR”
Remote night reduction, e.g., via the minicall system.
“RC”
Ripple control. Disconnection of the compressor and immersion
heaters during a certain time which is determined by electricity supplier
(specialized equipment).
“DHW” Extra DHW, used together with the accessory “Extra DHW button”.
Vacation
“On”
If you wish to have “sustained night reduction”, e.g., during traveling,
the duration of the vacation can be set here. Up to 250 days can be set.
“Off ”
Not activated.
Save my settings.
Here your own settings can be stored; confirm with the “OK” button.
Retrieve my settings.
The stored settings can be recovered here. Can be useful if you want to test
new settings, but change your mind and want to recover the old ones.
Load factory setting
The product is delivered with factory settings. These can be recovered by activating
this function.
