CTC Union EcoPart 425, Installation And Maintenance Manual

Page: 6 / 56

6 CTC EcoPart i425-i435 Pro
CTC EcoPart i425 Pro-i435 Pro
Important to remember!
Check the following points in particular at the time of delivery and installation:
• The product must be transported and stored in an upright position.
• Remove the packaging and check before installation that the product
has not been damaged in transit. Report any transport damage to the
carrier.
• Place the product on a solid foundation, preferably made of concrete.
If the product needs to be placed on a soft carpet, base plates must be
placed under the adjustable feet.
• Remember to leave a service area of at least 1 metre in front of the
product.
• The product must not be placed below floor level either.
• Avoid placing the product in rooms where the walls are of lightweight
design, as people in the adjoining room may be disturbed by noise and
vibrations.
• Ensure that pipes used between the heat pump and the heating circuit
are of adequate dimensions.
• Register the product for warranty and insurance via the website
https://ctc.se/kundservice#garantiregistrering
https://www.ctc-heating.com/customer-service#warranty-registration
No liability is accepted for any misprints. We reserve the right to make design changes.
For your own reference
Fill in the information below. It may come in useful if anything should happen.
Product: Serial number:
Installer: Name:
Date: Tel. no.:
Electrical installer: Name:
Date: Tel. no.:
When contacting CTC, always
mention the following:
• Serial number
• Model/Size
• the fault message shown in the
display
• Your telephone number
!
Information in
this type of box
[!] is particularly
important for
correctly installing
and using the
product.
i
Information in this
type of box [i] is
intended to help
ensure that the
product functions
optimally.
Serial number
CTC EcoPart 425-435
The 12-digit serial
number is found on a
sticker affixed to the top
cover of the product.