It is possible to combine the programmed tracks with the REPEAT function. After
you have programmed and started the device, please press the REPEAT button up
to three times. You can now use the functions described in the "REPEAT" section.
Listening to the Radio
1. Turn the function selector switch (16) to the FM ST or AM position.
2. With this switch you can select the desired frequency band.
3. UKW = FM ST., medium wave = AM (mono).
4. Tune in the desired station with the station adjustment knob TUNING (12).
5. The stereo control lamp (17) only lights up if you have selected FM stereo and
the station is being received in stereo quality. If reception is too weak and the
station being received is subject to interference, it is possible that this lamp will
not light up. If it is not possible to improve reception it is advisable to try a chan-
ge of location.
6. To receive MW/AM stations proceed in the same manner. In this frequency
band programs are transmitted in "mono" only.
Note: An aerial is integrated in the device for the reception of FM ST/AM stations.
The device can be aligned to the transmitter by turning and changing its position.
Cleaning and storage
•
Clean the device with a moist cloth and dry it well.
•
Do not use abrasive detergents!
•
If the device is not used for a long period of time (a few months), the battery is
to be removed from the battery compartment to avoid the „spillage“ of the bat-
tery acid.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
38
GB
5....-05-DR 564 CD 09.05.2003 11:47 Uhr Seite 38
