CTC Union ATU-R140, User Manual

Page: 19 / 46

ATU-R140 ADSL Ethernet USB Router User’s Guide
19
To configure the gateway for a Static connection, click on Setup and then click on New
Connection . The default Static connection setup is displayed. At the Type field select Static
and the Static connection setup page is displayed; figure 8 illustrates a typical Static
configuration. Give your Static connection a unique name; the name must not have spaces
and cannot begin with numbers. In this case the unique name is called
STATIC1 . Select the
encapsulation type (LLC or VC); if you are not sure just use the default mode. Select the VPI
and VCI settings; your DSL service provider or your ISP will supply these; in this case the
DSL service provider is using
0,35 . Also select the quality of service (QOS); leave the default
value if you are unsure or the ISP did not provide this information. You can also enable
Network Address Translation (NAT) and the Firewall options. If you are unsure, leave these in
the default mode.
Based upon the information your DSL/ISP provided, enter your assigned IP address, Subnet
Mask, Default Gateway (if provided), and Domain Name Services (DNS) values (if provided).
For the static configuration, you can also select a bridge connection or a routed connection.
Since static IP address is typically used to host WEB servers, you may want to use a bridge
connection.
Figure 8 (Static IP Connection Setup)
To complete the connection you must now click the apply button. The apply button will
temporarily save this connection. To make the change permanent you need to click on
Tools
(at the top of the page) and select System Commands . At the system commands page, click
on Save All .
4.4.1.6 Classical IP over ATM Connection Setup
The Classical IP over ATM (CLIP) support provides the ability to transmit IP packets over an
ATM network, ATU-R140 ADSL Gateway’s CLIP support will encapsulate IP in an AAL5
packet data unit (PDU) frame using RFC1577and it utilizes an ATM aware version of the ARP
protocol. (ATMARP. ATU-R140 ADSL Gateway’s CLIP support only allows for PVC support; it
does not support SVC.)