Installation Instructions
C-clamp Mount Setup
1.
Turn the C-clamp screw counter-clockwise until
the opening is wide enough to fit around desk or
table edge.
2.
Turn C-clamp screw clockwise to tighten and affix
C-clamp to desk or table edge.
3.
Slide the arm mount into the top of the C-clamp
and align the holes.
4.
Insert the arm mount fastener screw and turn
clockwise to tighten.
clamp screw
fastener screw
fastener screw
Suction Mount Setup
1.
With the semi-circle suction lock in vertical
position, place the suction grip firmly against
surface.
2.
Fold the semi-circle suction lock into horizontal
position to lock the suction grip in place.
3.
Slide the arm mount into place on the top of
the suction grip and align the holes.
4.
Insert the arm mount fastener screw and turn
clockwise to tighten.
Adjustment & Cable Management
Adjusting the Arm Mount:
Adjust to the desired postion using the included 3-in-
1 allen key.
3mm
230
o
180
o
300
o
360
o
360
o
180
o
3mm
2.5mm
2.5mm
2.5mm
3-in-1 allen key
4mm
Device Holder:
Adjust the width to fit your tablet or smartphone.
Cable Management System:
Arrange the cables into the cable covers and down
the tube using the included wire clips.
The suction grip will accumulate dirt and dust with regular use and should be cleaned with
cold water every 2 months. This will ensure that the suction grip maintains full strength.
