3. SETTING UP CABLE ROUTING
5. ATTACH VESA PLATE
5A. FIRST, WITH ALL THE ITEMS
ALIGNED, ROUTE ANY WIRES
THROUGH THE PLATE’S
OPENINGS.
5B. THEN ROTATE IN
SCREWS(G) AND WASHERS(E)
FROM THE TOP USING
PROVIDED TOOL (C) AS
ILLUSTRATED.
888-733-4448
4. ALIGN VESA PLATE
AND FRONT PLATE
COMPONENT AND WITH
FLOOR STAND
3A. WITH ONLY (1) PANEL BACK IN, SLIDE IN THE POWER CORDS AND ANY OTHER CORDS THAT
WOULD NEED TO BE CONNECTED TO THE TABLET THROUGH THE BODY AS SHOWN. THERE WILL BE
GAPS AT THE TOP AND BOTTOM FOR THEM TO ROUTE OUT TO THE POWER SOURCE AND TO THE
DEVICE. SLIDE IN SECOND PANEL WHEN ROUTING IS FINISHED.
G
E
C
B
D
J
4A. ALIGN THE VESA PLATE BASE (B) WITH THE
FRONT PLATE BASE (D) TO THE TOP OF THE
FLOOR STAND (J). MAKE SURE ALL THE HOLES
ARE ALIGNED AND READY FOR INSTALLATION.
