Lun
560 TVL Analogue electonic day/night camera
Preliminary Operation Manual
Copenhagen Sensor Technology A/S
Symfonivej 15
Phone
+45 44 92 18 55
Document no.:
K01-000-E01
DK-2730 Herlev
Fax
+45 44 92 18 56
Revision/Date:
A / Apr. 2013
Denmark
Web
www.copst.com
Author:
GJ
Page 14 of 15
10.
Specifications
PAL
NTSC
Image system
Sensor
High-sensitivity colour CCD sensor with complementary mosaic
Effective pixels (H x V)
752 x 582
768 x 494
Image format
4:3
Scanning system
2:1 Interlace
Horizontal frequency
15.625 kHz
15.734 kHz
Vertical frequency
50 Hz
59.94 Hz
Electrical specifications and functions
Video output
Composite video, 1 Vpp, 75 ohm
Horizontal resolution
560 TVL
Sensitivity
< 0.05 lx, 25% video @ F1.4, AGC on
Spectral Response
Visible
Signal to noise ratio
> 52 dB, AGC Off
Electronic shutter, Automatic
Electronic shutter, Manual (Fixed)
1/50 to 1/120,000 sec.
1/50 to 1/10,000 sec.
1/60 to 1/120,000
1/60 to 1/10,000 sec.
Gamma correction
0.45 / 1.0
Automatic Gain control
- AGC range
On / Off
36 dB analogue, 24 dB digital
Frame integration
- Range
On / Off
Up to 4 sec.
Day/night switching
Electronic
IR-sensitive
No (fixed IR-cut filter)
Fog penetration
Off, Low, Mid, High
White balance
ATW and AWB
Noise reduction
2D and 3D Digital Noise Reduction
Backlight Compensation (BLC)
On / Off
Extended Dynamic Range (XDR)
Off, Low, Mid, High
Configuration
OSD menu and RS-232
OSD Languages
English, Japanese
Mechanical
Lens mount
CS-mount with back-focus adjustment
Overall dimensions (W x H x L)
76.4 x 63.2 x 84 mm (incl. connectors)
Net weight
410 g
Video connector
75 ohm BNC
Power, data
7-pin terminal block
Iris control
4-pin plug
Environmental
Operating voltage
12 VDC ±10%
Current consumption
200 mA
Operating temperature
-30°C to +70°C
Operating humidity
Max. 80%
Storage temperature
-30°C to +70°C
Storage humidity
Max. 80%
CST cannot be held responsible for any technical inaccuracies or typographical errors. Specifications are subject to change without notice.
Note 1:
From approx. 55°C image degradation, in the form of a few pixels with blemishes, will occur.
From approx. 60°C the number of pixels with blemishes will increase.
