CSS MicroSystems AssistX Call, Instructions For Use Manual

Page: 42 / 48

42
| Instructions for Use
Assist X Call
• Sensor test after plugging in (for sensors with NO)
Flashing
2
button LED, goes off when the sensors are actuated; A
time window of 30s is provided for checking the sensor function.
This is indicated by the
orange
3
LED. During this time, the call trig-
gering is suppressed if an unsafe sensor is activated. Call suppres-
sion has no effect on safe sensors.
9. Settings
No settings can be made. Only the following functional tests:
Function LED Button LED Signal
Functional test
Simple sensors with NO
Press the button for 1 sec. Release after
fl ashing for
test mode
.
Test modeSimple sensors with NO
20 sec active
. Operate sensor to check
function. The
3
LED turns out when
each sensor with a closing contact has
been actuated once. Checked for 24h.