CSS MicroSystems AMAneo USB, Instructions For Use Manual

Page: 32 / 36

32 | Instructions for Use AMA neo USB
lights up
yellow
. Now you can set the click timer by pressing
4
[+]
or
3
[-]
. No light bar means no click timer. To return to work mode,
simply press the
6
selection button again, then the
5
LED will turn
green
again. The tolerance (the field size for the automatic triggering
of a click) can be set with the
„Button Delay“
function. More informa-
tion at „Button Delay“.
Function off:
If you keep the
6
selection button pressed for 4 - 6 sec, the
5
LED
lights up
pink
and all filters and delays are switched off (normal
mouse mode). To switch the functions on again, simply press the
6
selection button again for 4 - 6 sec. The
5
LED should now be
green
again. If you keep the
6
selection button pressed for >7 sec.,
AMA-
neo USB
is switched off completely. To switch the device on again,
simply press the
6
selection button until the
5
LED lights up
green
.
Factory reset:
Please note that all current settings will be irrevocably lost!
Press
and hold the
4
[+]
and
3
[-]
buttons at the same time. Now press the
2
reset button in the recess with a pen or a paper clip.