CSS MicroSystems AMAneo USB, Instructions For Use Manual

Page: 31 / 36

Instructions for Use AMA neo USB | 31
times so that the
5
LED lights up
green
again.
Button delay:
If you press the
6
selection button twice for briefly, the
5
LED lights
up
red
. Now you can adjust the delay of the mouse buttons by pres-
sing
4
[+]
or
3
[-]
. The buttons then only react after a certain time
according to the display in the
green light bar
. No light bar means
no delay. To return to work mode, press the
6
selection button twice
so that the
5
LED lights up
green
again.
If you want to use the Delay button for the mouse buttons, make sure
that the click timer is set to zero (no green bar). If the Click Timer is
activated (not zero), the Delay button has a different function! Here,
the tolerance (the size of the field in which you can move in order
to trigger an automatic click) is set for the click timer with the Delay
button. For a good function, 2 out of 10 green light bars are usually
sufficient.
Click Timer:
Auto-click means that the
left
mouse button is automatically released
if the mouse remains or is held on the same point for a certain time.
If you press the
6
selection button three times for briefly, the
5
LED