38
MB-P201
Integrated Peripherals Configuration Setup
This program lets you setup the components that are
integrated onto the motherboard. These features include the
E-IDE controller and drives, universal serial bus (USB)
controller, floppy controller, serial ports and parallel port.
The settings are preset at the factory and should be altered
with care. The values represented in this table are used as an
example, and may not match your BIOS settings.
Figure 8: Integrated Peripherals Configuration Setup
Esc : Quit
: Select Item
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS SETUP
AWARD SOFTWARE, INC.
IDE HDD Block Mode
: Enabled
IDE Primary Master PIO
: Enabled
IDE Primary Slave PIO
: Enabled
IDE Secondary Master PIO
: Enabled
IDE Secondary Slave PIO
: Enabled
IDE Primary Master UDMA : Auto
IDE Primary Slave UDMA
: Auto
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA
: Auto
On-Chip Primary PCI IDE
: Enabled
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support
: Enabled
KBC Input Clock
: 8 MHz
Onboard FDC Controller : Enabled
Onboard Serial Port 1
: COM1/3F8
Onboard Serial Port 2
: COM2/2F8
UR2 Mode
: Standard
Onboard Parallel Port
: 378/IRQ7
Parallel Port Mode
: Compatible
Parallel Port Mode
: SPP
