HV DTemp Measurement System – Introduction
User Guide
4
Version 0
1
.00 // 2021
1.6 Warranty and exclusion of warranty
The warranty covers the safety and functionality of the product within the warranty period.
Excluded from the warranty are claims based on possible consequential damages caused
by malfunction or non-function of the product.
The warranty shall become invalid if:
f
the product is handled improperly,
f
prescribed maintenance intervals are not observed,
f
the product is modified by the end-user,
f
the user does not observe the safety instructions and the product documentation,
f
the product is operated with accessories or parts which are not explicitly approved for
operation by the manufacturer of the product.
→
See chapter 2 "Safety Instructions".
1.7 ESD information
The manufacturer of the product declares that HV DTemp Measurement System modules
comply with the requirements of EU Directive 2014/30/EU.
NOTE!
i
Special care should be taken regarding electrostatic discharge (ESD).
Make sure that no electrostatic discharge occurs through the inner
contacts of the inputs.
Avoid electrostatic discharge when handling or mounting modules.
