CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER
USER'S MANUAL, VERSION 2.0.1
Copyright © Convergence Systems Limited, All Rights Reserved
60
User can enable the antenna ports by clicking on buttons from
“
Inactive
”
to
“
Active
”
state.
User can disable the antenna ports by setting buttons from
“
Active
”
to
“
Inactive
”
state.
Click
“
Apply
”
when the setting is confirmed. With this setting, each antenna port can have a
different output power. However all the Active ports are of the same inventory properties and
profile properties and frequency channel properties.
You can also set each port to have a different inventory and profile property and frequency
property by ticking the box
“
Enable Local Inventory
”
and
“
Enable Local Profile
”
and
“
Enable Local
Channel
”
and then selecting the values you like. The following is an example for a European
version, where there are 4 frequency channels and the user can select a different frequency.
The Start Q values are also different. This is particularly meaningful because the antenna may
be inventorying different number of tags in their operation direction. Of course, for different Q
value, one has to be careful as to set the appropriate
Dwell time (The duration time of each
antenna port in ms)
. If an antenna is reading a lot of tags, the Dwell time needs to be
increased as well.
Java Demo App
C# Demo App
C# Demo App
