CSL CS468 User Manual Download Page 30

Page: 30 / 144

CSL CS468 16-Port EPC CLASS 1 GEN 2 RFID READER

USER'S MANUAL, VERSION 2.0.1

5.5.5

Status Verification

The status of the reader, the PC software, and the network link in between should be constantly

monitored. The following are the methods:

PC server side IP configuration: run command prompt and then run "ipconfig". Make sure

the PC IP address is in the same subnet as the CS468.

CS468 reader side IP configuration confirmation: run command prompt and then run "ping

192.168.25.203" (or any other IP address that you have already assigned to the CS468

reader).

Socket status: run command prompt and then run "netstat -na"

Reader read tag capability: put a reference tag (tag with an ID that you know a priori) on an

antenna connected to the CS468 reader. Reference tag is actually an excellent idea to

check the health of a reader. The backend system should monitor the presence of this ID.

If this ID is seen, then the reader is still alive and well.

Summary of Contents for CS468

















































































































































Search results

Summary of Contents for CS468

Reviews:

Related manuals for CS468

Brands by name

Popular brands

CSL CS468, User Manual

Search results

Summary of Contents for CS468

Reviews:

Related manuals for CS468

Brands by name

Popular brands