SIGNATURE SERIES
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will
cause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that
Dow Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound
is used in the manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon® tape be used to seal plastic Noryl® threaded fittings.
Specifications
3
General Specifications
TSI32
MSI32
TSI48
MSI48
TSI64
MSI64
TSI96
MSI96
Grains Capacity - Regeneration / **
Lbs Salt Used (Per Tank)
35,000 / 15
32,000 / 9
26,500 / 6
52,500 / 24
48,000 / 15
39,750 / 9
70,000 / 30
64,000 / 18
53,000 / 12
105,000 / 45
96,000 / 27
85,000 / 18
Maximum Raw Water Hardness (grains)
75
100
100
100
Maximum Clear Iron / Manganese
15
20
20
20
Exchange Resin (cu ft per tank)
1.0
1.5
2.0
3.0
Mineral Tanks (Vortech)
9 x 48
10 x 54
12 x 52
14 x 65
Brine Tank (polyethylene w grid & safety)
18 x 33
18 x 33
18 x 33
18 x 40
Service Flow Rate (gpm per active tank)*
10.0
11.0
12.0
14.0
Backwash Flow Rate (gpm)
1.2
1.5
2.0
3.0
Gallons Used / Regeneration
59
68
102
135
Space Required
18 x 27 x 56
18 x 28 x 62
18 x 30 x 60
18 x 32 x 74
Approximate Shipping Weight (lbs)
130
163
204
290
* The pressure drop does not exceed 15.0 psi at Service Flow Rate.
