CSI LV-019, Service Manual, Page: 10 / 25

Signature 2 Series
pg. 10
Utilizing Bluetooth Control
To take advantage of the Bluetooth interface this feature must be set up on a Bluetooth enabled device.
Note: At the time of this release Bluetooth control only works on Android devices with a compatible version
of Bluetooth.
1. Download the Legacy View app from the Google Play Store or www.ChandlerSystemsInc.com
2. Pair the smart phone or tablet to the control valve
- Open the settings menu on your smart phone or tablet and click on Bluetooth.
- Look for the softener or filter valve under the list of available Bluetooth devices.
-
Select the device and pair (Default password is: 1234)
3. Once the devices are paired open the Legacy View app
- Click the Legacy View logo in the top left corner to refresh the list of connected paired control valves
and select which valve you would like to view.
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.