CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411
5 Maintenance
Study the instructions carefully. The items refer to the parts list and service kits section.
Handle scrap correctly.
* : Relates to the shaft seal.
5.4 Assembly of pump/single shaft seal
S
Stteepp 11
1. Remove spring (13).
2. Lubricate O-ring (15) and fit it in rotating seal ring (14).
N
NO
OTTE
E!!
Make sure that O-ring (15) has max. clearance from the sealing
surface.
3000-0088
Max
*
S
Stteepp 22
1. Refit spring (13) on rotating seal ring (14).
2. Fit the spring and the rotating seal ring on drive ring (10).
C
CA
AU
UTTIIO
ON
N
Ensure that the driver on the drive ring enters the notch in the
rotating seal ring.
TD 241-031/1
*
S
Stteepp 33
Fit the complete shaft seal on stub shaft (7).
N
NO
OTTE
E!!
Make sure that the Connex pin on the stub shaft enters the notch
in drive ring (10).
TD 241-032/1
*
S
Stteepp 44
1. Fit O-ring (12) on stationary seal ring (11) and lubricate.
2. Screw the stationary seal ring into back plate (25).
C
CA
AU
UTTIIO
ON
N
Only tighten by hand to avoid deforming the stationary seal ring.
(Max. 7Nm)
Use the tool supplied
Left-hand thread
*
S
Stteepp 55
1. Clean the sealing surfaces with contact cleaner before fitting
back plate (25).
2. Carefully guide the back plate onto adaptor (16).
3. Fit washers (21) and nuts (22).
TD 241-027/1
*
S
Stteepp 66
Lubricate O-ring (26) and slide it onto back plate (25).
TD 241-028/1
19
Summary of Contents for Alfa Laval SolidC-1
