1. Safety
8
PNEG-2305
Aluminum Centrifugal Fan
Maintain Equipment and Work Area
•
Understand service procedures before doing work. Keep area
clean and dry.
•
Never service equipment while it is operating. Keep hands, feet,
and clothing away from moving parts.
•
Keep your equipment in proper working condition. Replace worn
or broken parts immediately.
ST-0003-1
Keep Hands Away from Moving Parts
•
Do not operate the fan with electrical or mechanical guards
removed. Serious injury or death can result.
•
Do not put hand or arm in fan. Rotating parts can crush and
dismember.
•
Do not put any kind of tool inside the fan to clear debris while
the fan is operating. Damage to the equipment will result.
•
Lock-out power source before making adjustments, cleaning
or maintaining equipment.
ST-0020-2
Lifting Hazard
•
Single person lift can cause injury.
•
Use a mechanical lifting device to lift or move the equipment
during installation.
ST-0021-2
Install and Operate Electrical Equipment Properly
•
Electrical controls must be installed by a qualified electrician and
must meet the standards set by applicable local codes (National
Electrical Code for the US, Canadian Electric Code, or EN60204
along with applicable European Directives for Europe).
•
Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
•
Make sure all equipment and bins are properly grounded.
ST-0075-1
