pag. 5
FOREWORD
- Read the instructions carefully and keep them for future consultation.
- C.S.F. Inox S.p.A. reserves the right to make any changes to the documentation it deems neces-
sary without being obliged to update publications that have already been issued.
- When requesting information, spare parts or assistance, always specify the pump type (*) and
serial number (**) in order to ensure fast and efficient service: the complete code is given on the
plate and in the purchase documents.
1
SYMBOLS
2
SAFETY WARNINGS
When the pump is working the following occurs:
- Electric parts are in tension.
- Mechanical parts are moving.
- Pump body, pipelines and articulations are under internal pressure. Therefore do not remove any
protection or locking, do not loosen screws or clampings, as this can cause serious damages to
persons or objects.
The clamp joining the pump casing and the cover must be well tightened and it
should not be easily unscrewed by hand. The tightening of the clamp must be carried out by means
of a key and NOT by hand.
- Non-observance of inspection and maintenance can cause damages to persons and objects,
especially when dangerous or toxic liquids are pumped.
- When pumping liquids at a temperature over 60° C, adequate protection and warning signals are
required.
- When you buy a pump with bare shaft, motor coupling operations have to be carried out according
to technical directions and law, providing adequate protections for joints, gear belts, etc.
- Operations on the electric parts have to be carried out by skilled personnel, according to technical
directions and law, on authorisation of the responsible installer.
- Installation must ensure an adequate ventilation, in order to cool the engine, as well as enough
space for maintenance operations.
Before carrying out any operation which requires to disassemble the pump (inspection, cleaning,
seal replacement, etc.), the following preliminary operations have to be carried out:
- switch off engine tension and disinsert electric connection;
- close valves on suction and outlet pipelines, in order to avoid the risk of inundation;
- use adequate protections for hands and face, if the pump contains liquids which are injurious to
health (for example acids, solvents, etc.);
- consider if the liquid which flows out of the pump when disassembling is dangerous and arrange
for adequate safety measures.
Mod. AS 65-4-7,5/B.PT31 (*)
N° 12345 (**)
Item.
Giri 1400
kW 5,5
Volt 380-660
Hz 50
Plate example
Pay great attention to the text parts indicated by this
symbol.
Danger:
the non-observance of instructions can cause
serious damages to persons and/or objects.
Danger:
only skilled personnel is allowed to carry out
operations concerning the electric parts.
WARNING