CS Unitec DBE 160, Operating Instructions Manual

Page: 10 / 12

9
Warranty
Raw Material Recycling instead of Waste Disposal
In order to avoid damages on transportation, the tool has to be delivered in
solid packaging. Packaging as well as unit and accessories are made of
recyclable materials and can be disposed accordingly.
The tool’s plastics components are marked according to their material, which
makes it possible to remove environmental friendly and differentiated
because of available collection facilities.
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects . (To be documented by invoice or delivery note.)
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated free
of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-dismantled
condition to the manufacturer.
On sole responsibility we declare that this product is in conformity with the
following standards and standard documents:
EN 50 144, EN 55 014, EN 61 000, IEC 60 745
According to the regulations 73/23/EWG, 89/336/EWG, 98/37/EG
Elektrowerkzeuge GmbH Eibenstock
Lothar Lässig
21.07.2005
Declaration of Conformity
Environmental Protection