CS-Lab simDrive Series, Quick Start Manual

Page: 3 / 12

General
In CS-Lab's offer you can find simDrive™ AC servo drives 400W and 750W and compatible CSM AC motors.
This guide will help you to connect encoder and power cables (included) to run this set.
Sets available in CS-Lab's offer:
The Servo Drive & Motor 400W Set
1
: SimDrive™AC Servo 400W::325V + CSM Servo Motor AC 220V::400W
is a fully compatible set that includes:
- simDrive™AC Servo 400W 325V **M4-H040K Model
- CSM60-013M30 400W Servo Motor (with a 2500 imp/rev encoder and Hall sensors)
- power cable (5m)
- encoder cable (5m)
The Servo Drive & Motor 750W Set
2
: simDrive™AC Servo 750W::325V + CSM Servo Motor AC 220V::750W
is a fully compatible set that includes:
- simDrive™AC Servo 7500W 325V **M4-H075K Model
- CSM80-024M30 750W Servo Motor (with a 2500 imp/rev encoder and Hall sensors)
- power cable (5m)
- encoder cable (5m)
Power Module 325VDC/ 2000VA - Power Supply for a simDrive Servo Drive
The Power Module 325VDC/ 2000VA applies to:

simDrive™AC Servo 400W 325V **M4-H040K Model (the power module is sufficient for up to 6 of these drives)

simDrive™AC Servo 750W 325V **M4-H075K Model (the power module is sufficient for up to 4 of these drives)
The following Quickstart guide applies to simDrive servo drives 400W and CSM motors 400W.
1
Servo drives, motors and cables also available separately.
2
Servo drives, motors and cables also available separately.
3