background image

5

HORIZONTAL FREEZERS

INSTRUCTIONS OF INSTALLATION, OPERATION & MAINTENANCE

Before use, please read and follow all safety rules and operating instructions.

Crystal  has  a  policy  of  continues  improvement  on  its  products  and  reserves  the  right  to 

change materials and specifications without notice.

1. SAFETY

  This safety symbol alerts you to potential hazards.

  DANGER/ Do not store or use gasoline or other flammable vapors and liquids in the 

freezer. The fumes can create a fire hazard or explosion.

  To reduce the risk of fire, electrical shock, burns, personally injury, follow carefully the 

instructions with this symbol in & “Electrical connection”

  DANGER/ Never clean the appliance with flammable fluids. These fumes can create a 

fire hazard or explosion.

  DANGER/  Before  proceeding  with  cleaning  and  maintenance  operations,  make  sure 

that the power line of the unit is disconnected. Failure to do so can result in electrical 

shock or death.

  DANGER/ Do not connect or disconnect the electric plug when your hands are wet.

  DANGER/ The maintenance operations must be executed by an authorized technician.

  WARNING/ The fuse or circuit breaker size should be 16 amperes. 

  WARNING/  Do  not  use  solvent  cleaning  agents  or  abrasives  on  the  interior.  These 

cleaners may damage or discolor the interior.

  WARNING/ If on your freezer there is a mark with the symbol   means that the device 

contains  a  small  amount  of  R290  (propane),  hydrocarbon  flammable  as  coolant  and 

friendly to the environment.

  WARNING/ Do not store products exceeding the load line limit (indicative red horizontal 

line in the interior of the freezer).

 

 

 

 

 

 

 

2. TRANSPORTATION

Always transport the appliance 

in horizontal position.

3. INSTALLATION INSTRUCTIONS

3.1 

Before using your freezer

 

3.1.a

 Remove the exterior and interior packing.

 

3.1.b

 Check to be sure you have all of the following parts: a) storage baskets according 

your order, b) instructions of installation, operation & maintenance.

 

3.1.c

 Before connecting the freezer to the power source, is necessary to let it stand 

for some time. So you will reduce a possible malfunction in the cooling system which it 

becomes from the transportation.

 

3.1.d

 Clean the interior surface and gasket with lukewarm water using a soft cloth or 

sponge.

3.2 

Installation of your freezer

 

3.2.a

 Locate the freezer preferably in dry areas. Too much moisture in the air will cause frost 

to form quickly on the interior surface, requiring more frequent defrosting of the freezer.

EN

EN

Reviews: