Crystal Vision
Using the front control panel
The SYN-A 3G Home menu
Updating the display
The values displayed on an active front panel are only updated when an adjustment
is made and when changing menu level. If changes occur through the use of card
edge controls or other remote control, the text displayed on the active front panel will
not be updated immediately. If necessary, use the upward arrow to leave and then re-
enter a menu to update the display.
Active panel menu structure
At any time the main top-level menu (Home) is obtained by pressing the HOME key.
From the Home menu further selections can be made. Active function keys are
indicated by illuminated, integrated LEDs.
The main top-level menus for the
SYN 3G/SYN A-3G
are obtained by pressing the
F1- F4 keys from the Home menu. Menu keys are illuminated when active and when
further menus are available.
The top-level menus are:
•
Status – Press F1
•
Synchroniser – Press F2
•
Audio – Press F3
(SYN-A 3G only)
•
More selections – Press F4
•
AFD – Press F1
(SYN-A 3G only)
•
Proc-amp – Press F2
•
Alarms – Press F3
•
Preset (User presets and factory reset) – Press F4
When a sub-menu has been selected, further options may be obtained by using the
Shaft control to scroll through them. Once the desired option has been located a
selection or value change can be made by either toggling the appropriate function key
or by selecting and using the shaft control to alter a numerical value. A configuration
change or value will be activated as the shaft control is rotated or function button is
toggled. The variable being adjusted will appear in brackets. If the variable updates in
real time it will be contained within square brackets [Letterbox] or if the change
requires to be accepted angular brackets will be used <CVBS>. Pressing ENTER will
fix the new value.
The following chart shows the available
SYN 3G/SYN A-3G
menus. The actual
menus available may vary according to model and as software is updated.
SYN 3G/SYN-A 3G User Manual R1.3
23
9 July 2019