Crystal Vision
Using the front control panel
The Status menu
Pressing button F1 from the home menu will enter the status menu. This menu is
traversed by rotating the shaft control. No changes can be made from this menu as it is
read only.
Note:
Not all status information will be updated in real time. If necessary press the * button to
cause the display to update.
Menu
Description
Input present and
format
Press F1 from the home menu and rotate the shaft control to view
the input status.
See the supported video standards on page 7,
Not Supported, Missing.
RGB gamut status
Rotate the shaft control to view the RGB Gamut status.
OK, Error.
YUV gamut status
Rotate the shaft control to view the YUV Gamut status.
OK, Error.
GPI5 output status
Rotate the shaft control to view GPO5 alarm status.
On, Off.
GPI6 output status
Rotate the shaft control to view GPO6 alarm status.
On, Off.
Software version
Fitted software level.
PCB serial number
Electronically stored board serial number.
Levels menu (YUV/RGB processing)
Legalising works in the RGB domain to correct YUV values, which could be illegal in
RGB colour space. RGB processing is automatically bypassed in areas of the picture
where RGB legalising and/or colour correction is not required. RGB processing can also
be disabled if not required.
Pressing F2 from the home menu will bring up the top levels menu. The RGB menu
provides access to RGB gains, lifts and threshold levels. The YUV menu provides access
to gain, lift, threshold and slope parameters for Luminance (Y), and the Pb (U) and Pr (V)
colour difference components of the incoming SDI signal. The Chroma menu provides
access to the video, chrominance and hue adjustment controls.
CoCo 3G User Manual R1.7
29
11 January 2021
