Crystal Vision
Installation
Rear Connectors
Description
RM08 Tandem
RM14
•
9 modules per Indigo 2 frame
•
Recommended for 75 Ohm
unbalanced AES outputs with
high packing density per frame
for multiple ADAC modules
•
GPI lines only available at
frame remote connectors
•
Card 1 fits in slots 1, 5 and 9
•
Card 2 fits in slots 2, 6 and 10
•
Card 3 fits in slots 3, 7 and 11
•
No card fits in 4, 8 or 12
Notes:
Each RM14 is four slots high for three ADCA412 modules sharing a common reference
input.
The last module in the chain should terminate any looped video reference.
Only plug the ADCA412 cards into the top three slot associated with the RM14 rear
module, the bottom slot is not used and MUST be left vacant.
Rear Connectors
Description
RM21
•
24 modules per 4U frame, 12
per 2U frame, 6 per 1U frame
and 2 per DTB.
•
All frame slots can be used.
Notes:
The single slot high RM21, like the RM14, is for 75 Ohm use and allows a greater
packing density. This has been achieved by moving the reference input from a dedicated
BNC to the D-Type connector.
Rear Connectors
Description
RM35
•
24 modules per 4U frame, 12
per 2U frame, 6 per 1U frame
and 2 per DTB.
•
All frame slots can be used.
For details of fitting rear connectors please refer to the Indigo frame manual
ADCA412 User Manual R2.1
23
30 October 2018
