Crystal Vision
Hardware installation
31
DEC102SUser ManualV1.0 05/11/03
5 Hardware
installation
The DEC102S single height module uses the RM01, RM18 and RM02 rear connector and
fits into all Crystal Vision rack frames. All modules can be plugged in and removed while
the frame is powered without damage.
5.1 Rear modules and signal I/O
The FR2AV and Indigo 2U frame will house up to 12 single height modules and dual
power supplies. The FR1AV and Indigo 1U frame will house 6 single height modules and
a single power supply. The DTBAV and Indigo 1U high Desk Top Box has built-in power
supply and will house up to 2 single height modules.
RM01
Modular rear connectors
Description
RM01
•
12 DEC102 modules per
FR2AV or 2U Indigo frame
•
Composite sync loop through
output not available
•
All frame slots can be used
Note:
One DEC102S card can be fitted to each RM01 rear module.
BNC
Function
SDI OUT (1)
Serial Digital Output
SDI OUT (2)
Serial Digital Output.
PAL/C IN
Analogue Composite Video or C input.
Y IN
Analogue Y plus sync input (active in Y/C input mode only)
SYNC IN
Composite Sync (B & B) input
DELAY PULSE OUT
TTL pulse output for audio follow delay
For details of fitting rear connectors please refer to the appropriate frame manual.
