Crystal Vision
Using the front control panel
20
DEC102SUser ManualV1.0 05/11/03
Setting chrominance gains
Select the 'CHROMA' menu to allow the chrominance gains for the current mode to be
adjusted.
Press the 'F1' button to allow the shaft encoder to adjust the combined chrominance gain
from 0 to 200%. The shaft encoder LED will illuminate and an asterisk will appear on the
display next to 'CGAIN'. The shaft encoder will adjust both the U and V gains by the
same proportion of their default values. The 'CGAIN' value is an average of the U and V
values.
Press the 'F3' button to allow the shaft encoder to adjust the U gain from 0 to 200%. The
shaft encoder LED will illuminate and an asterisk will appear on the display next to
'UGAIN'.
Press the 'F4' button to allow the shaft encoder to adjust the V gain from 0 to 200%. The
shaft encoder LED will illuminate and an asterisk will appear on the display next to
'VGAIN'.
Press the 'CAL' button at any time while in this menu to set all gains to their default
values (100%).
