Crystal Vision
Hardware installation
ADDEC-310 User Manual R1.2
6
10/12/2007
2 Hardware installation
The ADDEC-310 single height module uses the RM01, RM23, RM24, RM25 and RM27
rear connectors. The RM25 quad height module will only fit into the 2U and 4U frames,
although the rest will fit into all Crystal Vision rack frames. All modules can be plugged
in and removed while the frame is powered without damage.
2.1 Rear modules and signal I/O
The Indigo 4 4U frame will house up to 24 single height modules with up to three power
supplies. The Indigo 2 2U frames will house up to 12 single height modules and dual
power supplies. The Indigo 1 1U frames will house six single height modules and a single
or dual power supply. The Indigo desk top boxes both have a built-in power supply and
will house up to two single height modules.
Note:
For details of fitting rear connectors please refer to the appropriate frame manual
Rear module connections with RM01
The RM01being a single height module will allow maximum packing density with the
maximum number of outputs available.
RM01 rear module connector
Description
RM01
•
24 ADDEC-310 modules
per Indigo 4 frame
•
12 per Indigo 2 frame
•
Six per Indigo 1 frame
•
2 per Indigo DT
•
All frame slots can be
used
BNC
I/O assignment
SDI OUT / RGB SYNC
Serial digital output / External RGB reference input (link selectable)
SDI OUT
Serial digital output
V/R IN / SDI OUT
Component V and R input / Serial digital output (link selectable)
Y/G/YCY/CVBS IN
Component Y and G, Composite YC-Y and PAL/NTSC input
U/B/YCC IN / SDI OUT
Component U and B, Composite YC-C input / Serial digital output (link
selectable)
SYNC IN
Composite sync (B & B) input
