Crystal Vision
Using the active front panel
ADDEC-310 User Manual R1.2
23
10/12/2007
4 Using the active front panel
4.1 Module selected
This operational guide assumes that the panel has been set up according to the Panel set
up procedure described in the Crystal Vision Control Panel manual.
Note:
It is
ESSENTIAL
that the panel set up procedure is followed and any old or unknown
passwords cleared prior to using the panel for the first time.
At power up, the two line, 20-character screen will display ‘Crystal Vision’ followed by
the firmware version number for the control panel. All eight control panel keys LEDs will
illuminate.
The Crystal Vision control panel start up display
'Control Panel' then briefly replaces the version number display.
If the control panel firmware has been updated for Statesman control (version 1.5.0 or
higher), Statesman Mode will be entered and the message, ‘Press CAL to Exit’ will be
displayed and the CAL LED will light.
Statesman mode is entered by default
