DRIFTWOOD SET UP FOR SUNRISE/JEWEL/SUPER
AND LAGOON.
ALL PIECES MARKED UNDERNEATH WITH A
LETTER
LEFT
MAIN MATRIX
(A)
FITS AT REAR OF BURNER
AS SHOWN,BEHIND THE TABS OF MATRIX
BRACKET.
FRONT BASE
(B)
FITS AS SHOWN ENSURING
BOTTOM IN CHANNEL OF MAIN BURNER WITH
CUT OUTS OVER SCREWS
FRONT AND BACK ARE ALIGNED WHEN
RIGHT
WITH MATRIX AND FRONT BASE FITTED PIECE
(C).
IS FITTED TO THE LEFT HAND SIDE,THE
FRONT BASE HAS A LUG AND THE UNDERSIDE
OF
(C) .
HAS A SLOT, THE (C) PULLS FORWARD AS
FAR AS POSSIBLE TO TOUCH THE FRONT OF THE
BASE AS SHOWN, THE REAR HAS A GROOVE CUT
AT THE BACK AND THE MATRIX CAN BE MOVED
SLIGHTLY SO (C) FALLS IN AND HAS CORRECT
POSITIONING ,
THIS PROCESS ENABLES THE REAR MATRIX THE
FRONT MATRIX AND DRIFTWOOD (C) TO ENSURE
ALL OTHER PIECES ALIGN CORRECTLY.
LUG
LEFT
DRIFTWOOD (D) IS FITTED WITH TWO POINTS AS SHOWN
FULLY FORWARD AND AS CLOSE TO PIECE (C)AS POSSIBLE
THE PIECE WILL JUST SIT LYING ON THE PILLAR OF THE
REAR MATRIX AND WILL BE TWISTED TO THE RIGHT AS
MUCH AS POSSIBLE AND FIRMLY POSITIONED.
ABOVE
PIECE
(F)
SITS TO THE RIGHT OF
(E)
INTO SHAPE OF SLOT
MATCHING SHAPE OF DRIFTWOOD PIECE (F),
THE REAR OF THE PIECE (F) SLOTS INTO INDENTATION ON
REAR MATRIX.
THE PIECE IS PULLED FULLY FORWARD TO FRONT BASE
LEFT
PIECE
(E)
SITS INTO SLOT ON FRONT PIECE FOLLOWING THE
ANGLE WITH THE SHAPE OF PIECE
(E)
THE LEFT SIDE
BRANCH JUST SITS ON
(D)
WITH THE BRANCH GOING TO THE
REAR BETWEEN THE TWO PILLARS ON THE MAIN MATRIX.
SLOT TO THE SHAPE OF (E)
SLOT
LOCATION POINT
LOCATION POINTS
issue 3
17
Summary of Contents for JEWEL CUBE
Page 11: ...issue 3 11...
