CRYPTAG CENSUS, Instructions Manual

Page: 14 / 22

Page 13 of 21
13
Appendix B APPROVALS
ELC1 generally requires some form of approval, as it is an intentional emitter of radio frequency. This
section describes the status of the product in various countries at the time of writing. For more up to date
information contact Identec.
United Kingdom
ELC1 is approved to MPT1337 and ETS 300 683
Other countries inside European Union
ELC1 is tested to ETS 300 330, for Radio Frequency emissions. The testing to ETS 300 330 and ETS
300 683 should be acceptable in all European Union countries. However certain national limitations may
apply.
United States of America
FCC Identifier: JHD-CEN5 applied for
For the purpose of FCC, this range of product is classified as a low frequency intentional radiator. "The
user is cautioned that any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment."
---------------------------------------------------
In all countries, this product is approved on the basis that it shouldn't cause interference to others, and
that it won't be affected by interference. If you make an unauthorised modification, you may invalidate
that approval, and you might be committing an criminal offence (depending on local legislation).
Low Voltage Directive
Cryptag Census readers have been designed and manufactured in accordance with EN60950, following
the provisions of the Low Voltage Directive.
ISO 9002
Identec's Quality System conforms to ISO 9002. (Certificate Number - FM36029)