This document may not be reproduced, copied, transmitted or given to a party other than the end-user without the explicit
written authorization of Cryo Bio System.
IFU-000100 [Indice C] [SYMS I] [P.
7
/
18
]
Recommendations
The CBS™ straw is guaranteed to be tight, because of the temperature, the pressure
and the thermal impulse time, adapted to the raw material.
The user must not change any of the sealing and press times.
The sealing area must be clean and dry.
Guaranteed tightness depends on the systematic use of suitable filling end fittings.
The SYMS sealer must never be used for sealing conventional PVC or PETG straws.
Never operate the sealer for more than 10 consecutive cycles. Allow at least 5
minutes between each series of 10 cycles.
Never operate the sealer empty (without any straws in place).
Comply with the protection indications given on the nameplate.
Pay attention to the stability of the sealer.
Never place the apparatus in such a way that it is difficult to operate the isolating
switch.
2.3 Standardization
We the undersigned, Cryo Bio System - ZI n°1 Est - 61300 SAINT OUEN SUR ITON, certify
that:
The SYMS I sealer, as per model ref.:
016399
- complies with the European directives in force:
Basse-Tension N° 73/23 CEE,
CEM 89/336 CEE,
and to the standards:
EN 61010-1
EN 61326-1
EN 61326/A1
- complies with the Canadian requirements: CAN/CSA C22.2 No. 1010.1-92
