2
OPERATOR INSTRUCTIONS
1. Unweave vertical straps from lower bar of tri-glide.
3. Pass straps back through tri-glide and slide up towards
plastic buckle to secure adjustment. Ensure that ends of each
strap match so that the chest rig is even.
4. Stow running ends in pass-through channel.
To continue attaching to EK01 & EK03, see page 3.
To continue attaching to EK02 & EK04, see page 4.
2. Attach chest rig hardware to plate carrier hardware and
adjust to desired height.
ATTACHING CHEST RIG TO AIRLITE™ PLATE CARRIER
