CruzPro MaxDS110, Manual

Page: 17 / 40

Page 17
Be sure to read the warnings about alarms in the Important Notes and
Warnings section about which Data Sources and conditions will sound an
audible alarm .
Setting/Starting Clock/Time-Of-Day Alarms/Race Timers
Press and hold both the and keys for ten seconds (until you hear a long
beep) to view and/or set the clock, time-of-day alarms and Race Timer1/Race
Timer2. You will see the display shown in Figure 21. The Hours will blink
showing which is being changed. Press the
key to switch between changing
the Hours or Minutes. Press (or hold )
the
and keys to change the value.
Press the key to cycle through the
eight Time of Day alarms and Race Tim-
ers. Press the + key for 1 seconds
when you are done to save the results
to memory.
Figure 22 - Clock/Alarm Editor
Setting the eight Time-Of-Day
Alarms
Figure 21 - Clock/Alarm Editor
Setting Time-Of-Day Clock
Figure 22 shows what you will see when
setting the Time-Of-Day alarms. These
are set the same way as the clock.
Press the + key for 1 seconds when
you are done to save the results to
memory.