INTERFACING SOLUTIONS
WVIGM-04M
Wi-Fi AUDIO/ VIDEO INTERFACE
FOR SELECT CHEVROLET, CADILLAC
& GMC VEHICLES 2013-UP
CONNECTING THE Wi-Fi MODULE
Using the included Wi-Fi interface module make the following connections as recommended.
Step 1
- Connect the 10-Pin Harness to the Wi-Fi module. This cable will allow you the Audio/Video output for the vehicle.
Use the AV inputs on the WHITE 22-Pin T-Harness to connect the Wi-Fi AV outputs.
(See page 4 for details)
Step 2
- The interface does not provide you with a Power wire for the Wi-Fi module. Connect the RED wire from the 10-Pin Wi-Fi
harness to the connections used to power the main module. wire. For the best signal we recommend GROUNDING the Wi-Fi
module near the 12V Source. See Page 5 for more information.
10-PIN
(male plug)
Wi-Fi
INTERFACE
BLACK/
GROUND
RED/ 12V ACC
FACTORY
A/V INPUT
TO FACTORY
A/V INPUT
4 5 6
ON
1 2 3
DIP 1 = ON
2
3
4
5
DIP 6
OFF
ACTIVATE
VIDEO
IN-MOTION
8-PIN
(male plug)
4 5 6
ON
1 2 3
STATUS LED’S
CAR SIDE
CUT WIRE
YELLOW/BLACK/CAR SIDE
YELLOW/RADIO SIDE
CUT PIN 4
TO INTERCEPT
THE DATA
RED/12V CONSTANT
BLACK/GROUND
USE FACTORY GREEN
CONNECTOR FOR POWER
AND GROUND
www.cruxinterfacing.com
Rev. 091714
7