Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.061319
VIMMB-85S
Video In Motion Activation for
select Mercedes Benz Vehicles with NTG3, 3.5 & 5 Systems
1 of 5
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
- Retains functionality of factory-installed navigation system for passenger access at anytime.
- Allows onscreen access to factory Bluetooth keypad*.
- Allows for navigation destination address entry at anytime*.
- AV input cable included.
*Subject to capability of factory-installed navigation system.
PRODUCT FEATURES:
PARTS INCLUDED:
VIMMB-85S Module
VIMMB-85S Harness
AV Cable
DIP SWITCH SETTINGS:
Vehicle / Navigation
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
Video In Motion permanent
ON
OFF
OFF
OFF
ON
ON
Video In Motion non-permanent*
OFF
OFF
OFF
OFF
ON
ON
S Class (W221) with factory rear-view camera
and Video In Motion permanent
ON
ON
OFF
OFF
ON
ON
*With DIP #1 set to OFF, use the GREEN wire on the VIMMB-85O harness to activate/deactivate the VIM function. Connect
the GREEN wire to a +12V source to activate VIM. The use of a toggle switch (not included) is recommended to allow
activation and deactivation of the VIM function (non-permanent).
POWER CONNECTION:
NTG3 and NTG3.5
NTG5
PIN 1 (RED)
PIN 5 (BLACK)
To VIMMB-85S Module
PIN 20 (RED/BLUE)
PIN 10 (BROWN/WHITE)
To NTG3/3.5 20 Pin connector
PIN 1 (RED)
PIN 5 (BLACK)
To VIMMB-85S Module
PIN 15 (RED)
PIN 12 (BROWN)
To NTG5 Quadlock connector
