Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.011420
7 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80F
Front & Rear Camera Integration Interface for
Select 2016-2018 GM Vehicles with CUE, Intellilink, & MyLink Systems
Use the OSD menu to make the necessary settings. Remember to Run
Save&Reboot
after the settings are
made. Unplug the OSD Control Pad after setting the cameras and keep it in a secure location in case it is
needed to change the settings.
REAR AND FRONT CAMERA SETTING
Dynamic Parking Guide Lines
To turn ON the Dynamic Parking Guide Lines, go the Rear Input > Rear Set and turn ON Warning LANG.
Go back to the root menu and Run Save&Reboot. Remember to unplug the OSD Control Pad otherwise
the unit will not function properly. Set the parking brake on, start the car, put the gear in reverse, turn the
steering wheel all the way to the left and all the way to right then put it in the center. The RVCGM-80F will
calibrate automatically.