INTERFACING SOLUTIONS
RVCFD-79
REAR-VIEW INTEGRATION INTERFACE
FOR FORD & LINCOLN VEHICLES 2011-UP
W/ MYFORD TOUCH RADIOS
www.cruxinterfacing.com
Rev. 072214
9
ACTIVATING THE VIDEO IN-MOTION
There are several ways to activate the Video In-Motion, depending on the options available to the vehicle. This page will guide you through the
known options available.
Option 3
- Non-Permanent: This is the most universal method of Enabling/ Disabling the Video In-Motion. This method will work on all
applications, regardless of the SWC type or GPS and Non-GPS. The diagram below will assist you on how to connect the
Toggle Switch. Be aware that with any of the options other that option 1, dip switch number 1 must be set to “OFF”.
Step 1: Use both GREEN wires form both modules to toggle the Video In-Motion.
Step 2: Tap the RED (12v Constant) wire from the 8-Pin connector on the C-500 module to power the Toggle Switch, or the C-125.
Step 3: Mount the switch in an accessible location to be able to activate and deactivate at your convenience.
54-PIN
(female plug)
TO FACTORY
DISPLAY
------------------
------------------
------------------
54-PIN
(male plug)
8-PIN
(male plug)
WHITE/ NOT USED
4 5 6
ON
1 2 3
4 5 6
ON
1 2 3
C-500
INTERFACE
C-125
INTERFACE
DOES NOT REQUIRE YOU TO
TAP FOR REVERSE SIGNAL
(SIGNAL IS FROM MODULE)
SONY
8” RADIO
WHITE/ REVERSE
12V OUTPUT
CAMERA
NOT INCLUDED
TAP GROUND
ON BLACK WIRE OF
8-PIN CONNECTOR
YELLOW/ VIDEO SIGNAL
STATUS LED’S
STATUS LED’S
8-PIN
(male plug)
CAMERA INPUT
BLACK WIRE/ TAP HERE
OPTIONAL/
TOGGLE SWITCH
ENABLE
DISABLE
GREEN/ VIM
GREEN/ VIM
RED WIRE/ TAP HERE
4 5 6
ON
1 2 3
4 5 6
ON
1 2 3
DIP 1 = OFF
2 = ON
3
4
5
DIP 6 = ON
OFF
FACTORY
GPS
DIP 1
2
3
4
5
DIP 6 = ON
OFF
DIP 1 = ON
2 = ON
3
4
5
DIP 6 = ON
OFF
NO
FACTORY
GPS
DIP 1 = ON
2
3
4
5
DIP 6 = ON
OFF
C-500
INTERFACE
C-125
INTERFACE
TAP HERE/
BLACK WIRE
