INTERFACING SOLUTIONS
RVCCH-75K
REAR-VIEW CAMERA & FORCE RVC
INTEGRATION INTERFACE
FOR CHRYSLER & JEEP VEHICLES 2014-UP
www.cruxinterfacing.com
6
ACTIVATING THE FORCE REVERSE CAMERA
In order to activate the FORCE REVERSE CAMERA feature, make sure Dip switch number 4 is set to “ON”.
STEP 6 -
To switch to the FORCE RVC, simply press the “BACK” once. If there is no Video signal to the input, you will simply see a BLUE
screen.
You can also use an optional toggle switch (not included) as an analog trigger.
Use the GREEN wire to control the Force RVC via a toggle switch.
Make sure to set Dip switch number 4 to “ON”.
52-PIN
(female plug)
8-PIN
(male plug)
4 5 6
ON
1 2 3
TO FACTORY
DISPLAY
CAM INPUT
(female plug)
GREEN/
FORCE RVC OPTION
WHITE/
REVERSE OUT
4 5 6
ON
1 2 3
DIP 1 = OFF
2 = OFF
3 = OFF
ACTIVATE
RVC & FRVC
CAN-BUS
INTERFACE
CAN-BUS
INTERFACE
OPTIONAL
/
TOGGLE SWITCH
ON
OFF
STATUS LED’S
POWER 12
GROUND
52-PIN
(male plug)
BLACK/
GROUND
FORCE RVC
TAP RED/
12V CONSTANT
ON 8-PIN
rev.060115
